Hamburg Tug Ballet - Special Performance

While attending the International Tug + Salvage Conference in Hamburg, Germany June 16-20, I was fortunate enough to have a ringside seat for a special performance of the famous Hamburg Tug Ballet. Performed each year in May to celebrate the Port of Hamburg's Anniversary, the tug companies got together again, under the sponsorship of Schottel, to give an encore presentation.

First a bit about the Hamburg tug scene. A massive port, Hamburg was long the stronghold of a number of local companies that co-operated by pooling their tugs to provide services in proportion to their fleet size. They also struck a tariff, that compensated them for a relatively large crew size.
In 1999 the Dutch company Kotug "invaded" Hamburg. With smaller crews, they were able to give lower rates, and signed contracts with certain shipowners. The local combine reduced its tarifs, and still maintain their co-op dispatching system.

The tug ballet was first performed in the 1980s as a means of displaying the versatility of tractor tugs -those tugs with propulsion units mounted forward -either azimuthing Schottel units or Voith type- the pioneers of true tractor tugs. (Azimuthing stern drive tugs, ASDs, are sometimes called reverse tractors, because the drives are mounted aft).

The five tugs featured in the ballet, represent the partners in the co-operative and are beautifully painted and shined up, even though they work daily in the port. 

Leading the parade Hans wears the colours of Louis Meyer, the smallest company in the operating pool. The tug is actually owned by Petersen + Alpers, and still has that company's symbol on its bow and the inner surfaces of its funnels.  The two companies have overlapping ownership.
Built in 1982, the tug is rated at 3,000 bhp, 27 tonnes bollard pull and is a Schottel tractor.

Next up was Fairplay VI, which along with the other tugs, made high speed runbys, and tight cornering. Fairplay is not a member of the pool, but participates in the ballet.
Built in 1992, it has 3,060 bhp and 41 tonne bollard pull, with Schottel drives.

Wearing the traditional Hamburg tug livery of black hull, brown house and white bridge, Bugsier 18 makes an impressive roll.
 Bugsier 18 dates from 1992, with 3,060 bhp and a 30 tonne bollard pull, it is a Voith tractor.

 Petersen+Alpers representative is Wilhelmine, a sister of Hans, the parade leader.
Two years newer that Hans, Wilhelmine was buit in 1982, and with 3,000 bhp rates a 27 tonne bollard pull.

Lutgen+Reimers'Constant was the final tug in the line, and is similar to Bugsier 18. Although its skipper was a little less daring in close quarters work, he was no slouch in the rolling department.
Built in 1987, the 2,500 bhp tug gets 30 tonnes bollard pull through its Voith tractor drives.

From our vantage point aboard a harbour tour boat, which was also the centre of the ballet's focus, we got some very tight views of tugs in action:
All the tugs in the ballet were tractors, and thus work over the stern for ship handling. Despite being in absolutely pristine condition, they are working tugs. Typical of tugs everywhere, they eave the deck door open for ventilation, despite the safety board warnings about downflooding in emergency situations.
No doubt the tugs are maintained to an extra high order for their ballet performances, but all the tugs in Hamburg appear spotless.Look at the glistening metal trim around the upper windows!
They are also impressively handled by their skilled skippers.

Within an hour of the performance, Constant was back at work. Despite their age, ranging from 22 to 34 years old, and relatively low bollard pull of 27-41 tonnes, there is lots of work for these older tugs in Hamburg. Vast numbers of small feeder container ships and tankers mix in with the huge container ships and bulkers that also visit the port, and use large and newer tugs. More on those later.